Knowledge Base
Accessing the UConn Public Wireless Network
There is currently a wireless network available to UCONN students in various academic and multi-purpose areas around campus. These locations include the Student Union, MSB, Gampel Pavilion, and the UConn Co-op. (For a full list, please refer to this website) There is no public wireless available in residential halls. In order to access the UConn network wirelessly in residential halls, students must use their own personal networking devices. ResNet recommends the devices below, as we are better equipped to troubleshoot them and offer assistance when necessary.
In order to use the UCONN public wireless, located in various hotspots around campus, you will need a computer or handheld device with an 802.11b/g wireless network adapter.Almost any IEEE 802.11b/g card will work with the UCONN wireless network.
UCONN UITS - Network Engineering does not recommend any specific brands of adapters at this time. If you are purchasing a wireless adapter it is important to concentrate on finding a card that has the following criteria listed on the box or documented in its specifications. Check with the manufacture of the PC or PDA to ensure it is compatible with the device and Operating System before making your purchase. WPA2 Enterprise and 802.11i may be required in the future for the secure network.
| Specification |
Comment |
| IEEE 802.11g |
recommended |
| IEEE 802.11b |
will work |
| WPA2 Enterprise |
Wi-Fi Alliance compatibility specification |
| IEEE 802.11i |
specification ratified, acquire when available |
Wireless Access in Residence Halls
There is no public wireless available in residential halls. When desiring a wireless network in a residence hall students can set up their own device. In order to facilitate support of these devices we encourage and recommend students use the following models. We cannot guarantee complete support for these devices but will be able to better troubleshoot as needed if the models listed below are used. Before using any of these devices please go to netreg.uconn.edu and register your device. You are expected to setup your device as specified on our web page to ensure appropriate use.
Router--Linksys WRT54G
| Manufacturer |
Linksys |
| Make/Model |
WRT54G |
| Data Speed |
Up to 54 Mbps |
| Security/Encryption |
128 Bit WEP |
| Requirements |
PC (200MHz or Faster) with 64 MB RM, IE 4.0/Netscape 4.7 or higher |
| OS Compatibility |
Windows 98/Me/2000/XP and Mac OSX |
| Power |
via included power adapter |
Installation and Configuration Instructions
Before setting up the Linksys WRT54G Router, you must call ResNet and register the device with the WAN MAC address. This MAC address is located in the configuration utility.
Physical Setup
- Plug the device into an electrical wall socket
- Plug an ethernet cord from the computer to one of the numbered ports on the router (NOT the Internet port)
Software Configuration
Apple Router--Airport Express Base Station with AirTunes
| Manufacturer |
Apple |
| Make/Model |
Airport Express Base Station with AirTunes |
| Data Speed |
Up to 54 Mbps |
| Security/Encryption |
128 Bit WEP |
| Requirements |
AirPort or Airport-Extreme enabled computer, iTunes 4.6 or later, WiFi certified 802.11b or 802.11g PC |
| OS Compatibility |
Mac OSX v.10.3 or later, Windows 2000/XP |
| Power |
100-240V AC, 50-60Hz, Input Current: 0.2 Amps |
Installation and Configuration Instructions
Before setting up the Airport Express Base Station with AirTunes, you must call ResNet and register the device with the MAC address. This MAC address is located on the device itself and is labeled as the "Airport ID."
Physical Setup
- Plug the device into an electrical wall socket
Software Configuration
Desktop Adapter--Linksys WMP54G
| Manufacturer |
Linksys |
| Make/Model |
WMP54G |
| Internal/External? |
Internal PCI Card with External Antenna |
| Desktop/Laptop> |
Desktop |
| Data Speed |
Up to 54 Mbps |
| Security/Encryption |
64 Bit and 128 Bit WEP |
| Requirements |
64 MB RAM, available PCI slot, CD-ROM drive |
| OS Compatibility |
Windows 98/Me/2000/XP |
| Power |
3.3v bus powered |
Installation and Configuration Instructions
Physical installation instructions can be found online for different computer models. Otherwise, follow the instructions provided in the manual accompanying the device. However, if you run into any difficulties we will attempt to assist you in following the instructions in the manual.
This adapter will only allow your computer to access a wireless network, and will not create one for you to connect to. You will still need a wireless router in order to set up a wireless network.
ResNet does not offer hardware support and cannot physically install your network device, however we will offer as much phone support as we can during the installation process.
Laptop Adapter--Linksys WPC54G
| Manufacturer |
Linksys |
| Make/Model |
WPC54G |
| Internal/External? |
External PCI Card |
| Desktop/Laptop> |
Laptop |
| Data Speed |
Up to 54 Mbps |
| Security/Encryption |
64 Bit and 128 Bit WEP |
| Requirements |
200 Mhz or better processor, 64 MB RAM, available CardBus Slot, CD-ROM drive |
| OS Compatibility |
Windows 98/Me/2000/XP |
| Power |
3.3v bus powered |
Installation and Configuration Instructions
Physical installation instructions can be found online for different computer models. Otherwise, follow the instructions provided in the manual accompanying the device. However, if you run into any difficulties we will attempt to assist you in following the instructions in the manual.
This adapter will only allow your computer to access a wireless network, and will not create one for you to connect to. You will still need a wireless router in order to set up a wireless network.
ResNet does not offer hardware support and cannot physically install your network device, however we will offer as much phone support as we can during the installation process.
Apple Adapter--Apple Extreme Card
| Manufacturer |
Apple |
| Make/Model |
Airport Extreme Card |
| Internal/External? |
Internal PCI Card |
| Desktop/Laptop> |
Power Mac G5, Power Mac G4 (FW 800/12-inch/12-inch DVI/12-inch FW 800), iMac, iBook G4, eMac (ATI Graphics/USB 2.0) |
| Data Speed |
Up to 54 Mbps |
| Security/Encryption |
WEP and WPA |
| Requirements |
Airport Extreme Base Station, AirPort Admin Utility 3.1.1 or later |
| OS Compatibility |
OS X.2.7 or later, Windows 98/Me/2000/XP |
| Power |
3.3v bus powered |
Installation and Configuration Instructions
Only capable of being installed into Power Mac G5, Power Mac G4 (FW 800/12-inch/12-inch DVI/12-inch FW 800), iMac, iBook G4, and eMac (ATI Graphics/USB 2.0) computers. Physical installation instructions can be found online for the individual models listed above. Otherwise, follow the instructions provided in the manual accompanying the device. However, if you run into any difficulties we will attempt to assist you in following the instructions in the manual.
This adapter will only allow your computer to access a wireless network, and will not create one for you to connect to. You will still need a wireless router in order to set up a wireless network.
ResNet does not offer hardware support and cannot physically install your network device, however we will offer as much phone support as we can during the installation process.
|
|
